REPLACES MINERAL SPIRITS
Does not clean tape residue on frame edges. Ideal for on-press color changes. Safe, non-toxic, biodegradable and recyclable. Fresh aroma.
ranmar's Greeneway Multipurpose Ink Remover is a safer and low odor formula that removes textile ink with or without additives.
Will Not Remove Tape Residue.
Ideal for Recycle Tanks.
Can Be Diluted with Water Up to 50%
Many screen printers use a multitude of different inks and additives to keep up with today's fashion trends and printing. Franmar’s Greeneway Multipurpose Ink Remover allows screen printers to clean any type of textile ink with or without additives. Simple, safe and effective - as cleaning screens should be.
Low Odor.
Fast-Acting.
100% Biodegradable.
One Step Clear Ink + Emulsion Remover is formulated for dip tanks to remove ink and emulsion from screens in one simple step in only 3 to 5 minutes.
Formulated for Use in Dip Tanks.
Removes Plastisol, UV and Water-Based Inks.
Can be Used as a Direct Apply.
Safe to Reclaim Wood, Aluminum or Roller Frame Screens.
Franmar’s revolutionary One Step Clear is formulated for dip tanks to remove ink and emulsion from screens in one simple step. Efficient, economical and eco-friendly, it removes traditional plastisols and UV inks after soaking for only 3 to 5 minutes. When the solution is ready to be replaced, Franmar’s Neutralizer Powder is a great add in to neutralize the pH for safe drain disposal.
Long-Lasting (up to 6 months).
Concentrated.
As Little as 5 Minute Soaking Time Needed.
Cleans 300-600 Screens Depending on Tank Size and Number of Screens Used.
Removes Any Type of Emulsion, Stencil or Capillary Film.
REPLACES MINERAL SPIRITS - CHEAPER TOO!
A clean air solvent. No dangerous vapors. Biodegradable and non-toxic. Removes tape residue on frame edge. Made naturally from soybeans grown in America.
Quickly Degrades Plastisol Ink.
Cost Only Pennies per Screen.
Does Not Quickly Evaporate like Traditional Solvents.
Great for Cleaning Plastisol Inks, All-Purpose Inks, and Nylon Jacket Inks.
Franmar's Plastisol Ink Remover eliminates the use of mineral spirits and other volatile solvents while save time and money. Plastisol Ink Remover was the first product introduced by Franmar to replace the caustic, toxic, high odor products, and at a fraction of the cost. Plastisol Ink Cleaner effectively cleans screens without the odor and is drain safe. Low VOC and 100% biodegradable, this ink remover reduces the hazards of screen reclamation to workers and the environment.
Low Odor.
Environmentally Friendly.
Non-Caustic and Non-Hazardous.
ON PRESS SCREEN WASH
Removes plastisol inks for quick on-press clean-ups and color changes. Just wipe with a damp cloth and re-tape immediately. Great screen opener. 100% Biodegradable.
Quickly change colors on press or open clogged mesh areas during a run with On Press Ink Remover.
Works Great on Plastisol Inks and All-Purpose Inks
Safe On-Press Screen Cleaner
Quick Color Changes
Great Screen Opener
100% Biodegradable
Overview
Quickly change colors on press or open clogged mesh areas during a run, saving valuable time and money. Franmar’s On Press Ink Remover is non-aerosol and replaces harsh chemicals such as Methylene Chloride without the negative side-effects and offensive odor.
Cleans 35 Standard Silkscreens Per Quart
Great for All Textile Screen Printing Shops
Made with 100% American Grown Soybeans
HELPS ELIMINATE PINHOLING
Ready to use. Rinses clean with hot or cold water. Removes solvent residues that interfere with tape sticking. Made from distilled CORN OIL. 100% biodegradable
D•GREASE Screen Degreaser is a fast-drying formula that helps prevent “fish-eyes” and is great for prepping screens before recoating them with emulsion.
Great Mesh Prep.
Promotes Longer Screen Life.
Pleasant Scent.
Alcohol-Free.
Great Multi-Surface Degreaser.
Revives Stickiness of Water-Based Pallet Adhesives.
ALSO DEGREASES
Safe, easy to use ink haze remover. Removes ink haze, scuz and ghost images. Degreases at the same time. Will not burn your skin. No fumes. 100% biodegradable. Made from soy.
Franmar D•HAZE Haze Remover for screen printing is the safer, non-caustic and effective ghost and haze remover for your screen printing shop.
Safe on Mesh.
Promotes Longer Screen Life.
Made with 100% American-Grown Soybeans.
SAFE - GEL FORMULA
Ideal for tough jobs and large screens. No fumes, non-caustic - will not burn your skin. Made from American grown soybeans. A safer 100% biodegradable solvent.
D•HAZE Gel clings to the affected haze area and can be left on for long periods of time for tough or stubborn ghost images.
Safe on Mesh.
Clings to Haze Area.
Gelled for Greater Control.
Can be Left on Overnight.
Franmar’s D•HAZE Gel is an exclusive gel formula that allows greater control for removing ghost and haze images. The gel clings to the affected haze area and can be left on for long periods of time for tough or stubborn ghost images. Good haze removal practices save screen printers money with longer usability of screens.
Promotes Longer Life of Screens.
Made with 100% American-Grown Soybeans.
PLATEN CLEANER
Cleans heavy fleece accumulations of platens. Just spray and wipe. Removes over spray from press and floors, and ink from squeegees and machines.
Franmar’s Ickee Stickee Unstuck quickly eliminates the sticky mess that can build up on pallets and other surfaces around the shop. A few sprays and a swipe of a shop towel, and your pallet is clean and ready for the next run.
Effective on a variety of adhesives.
Pleasant citrus aroma.
Works in seconds.
Eliminates "sticky mess".
Franmar’s Ickee Stickee Unstuck quickly eliminates the sticky mess that can build up on pallets and other surfaces around the shop. A few sprays and a swipe of a shop towel, and your pallet is clean and ready for the next run.
RECLAIMER AND DEGREASER.
Removes any emulsion, film or stencil.
6-9 month shelf life (will turn brown when bad).
Non-Hazardous Non-Caustic.
Emulsion Remover is specifically designed to penetrate and dissolve all types of emulsion as well as capillary film without weakening the mesh.
Built-In Degreaser.
Changes Color When No Longer Active.
Removes Any Brand of Emulsion or Capillary Film.
Works Great to Reclaim Silkscreens.
Franmar's Water-Based Ink remover is exclusively made for screen printers that print with water- based inks. Water-Based Ink Remover will clean all types of today's water- based inks and even works as a screen opener while still on the press. Water-Based Ink Remover delivers all the same great benefits of Franmar's line of screen cleaners developed through the last 30 years and saves cleaning time and screens that could not previously be cleaned. Virtually no odor. 100% Biodegradable. Drain safe. No caustics. Spend more time printing and less time cleaning. #181
Wash•Away Solvent Ink Remover is an excellent eco-friendly replacement for traditional mineral spirits and other volatile solvents for cleaning solvent based inks.
Replaces Mineral Spirits and Other Volatile Solvents.
Non-Flammable and Non-Evaporating.
Exceeds Regulations.
Franmar’s Wash•Away Solvent Ink Remover is an excellent eco-friendly replacement for traditional mineral spirits and other volatile solvents for cleaning solvent-based inks. This great formula is non-flammable and biodegradable with a very low odor. A must-use product for today’s solvent ink printers.
Made with 100% American-Grown Soybeans.
100% Biodegradable.
Non-Toxic and Non-Caustic.
Franmar's UN-Lok removes locked emulsion and saves you money by bringing your screens back from the dead. With its gel formulation, UN-Lok stays where you put it, allowing it to soak into all types of stubborn locked emulsion.
Low odor.
Safe for all mesh.
Gel formula sticks where you put it.
Works on all types of locked emulsion.
Saves time and money.
UN-Lok is a revolutionary product that saves screens, time and money. UN-Lok removes any type of locked emulsion, even capillary films, with hours of power washing or the need to remesh. Keep your screens alive with our latest non-caustic and safer screen cleaning product.
Today, industrial printers are moving to more earth friendly inks such as UV. Franmar's UV Ink Remover is a great cleaner that easily degrades these UV inks from screen meshes.
Low Odor.
100% Biodegradable.
Degrades Inks Quickly.
Low Evaporation.