Change Message in Themes>Manage Resources
You have no items in your shopping cart.
Close
Filters
Search

Ulano #78 Haze Remover Paste - Kilo

An ink haze and stencil residue remover that is effective on most inks and emulsions. The efficiency depends on the age of the dried-in ink. Haze Remover Paste No. 78 does etch mesh surfaces. To avoid premature rupture of your mesh, (especially worn or fine mesh), it is best to limit the application time to as short as necessary and never more than 10 minutes. Wear goggles and gloves. Follow instructions carefully to avoid damaging mesh. Recommended for use with all Ulano Stencil systems on all mesh except natural silk and metalized polyester. For industrial use only. Very low alkaline content. Instructions -Power wash after rinsing most of the haze remover from the mesh -Remove ink and stencil as usual and allow the mesh to dry. -Stir the Haze Remover Paste No. 78 thoroughly. -Results can be improved if the mesh is treated with the solvent of the ink before the paste is applied. -Water on the screen or brush dilutes the action of the chemical. -Brush the paste briskly on both sides of the dry screen with a dry, long bristle nylon brush. -Haze Remover Paste No. 78 does etch mesh surfaces. To avoid premature rupture of the mesh, especially worn or fine mesh, it is best to limit the application time to as short as necessary. -Let the screen stand for no more than ten minutes or the paste can damage the mesh. -Never let No. 78 dry on the mesh. -Rinse with a gentle spray to avoid splashing the chemical, then a power spray from both sides. Health & Safety Information Haze Remover Paste No. 78 is for industrial use only. Use adequate ventilation. Avoid prolonged breathing of vapors. Avoid contact with the skin, eyes, mucous membranes, and clothing. Haze Remover Paste No. 78 is combustible: do not use near heat or open flame. It is corrosive and contains caustic soda, causing severe burns on contact. Harmful or fatal if swallowed. Flush spills immediately with water mixed with equal parts of vinegar. Wear rubber gloves, goggles (or preferably a plastic face mask), and a plastic or rubber apron. First Aid: Eyes - Flush immediately with water for at least 20 minutes. External - Flood exposed area with water for at least 15 minutes. Wash with a solution of equal parts vinegar and water. Internal - Drink large quantities of water or milk followed by citrus juice or diluted vinegar. Do not induce vomiting. CALL A PHYSICIAN AT ONCE. UPS or FedX Hazardous Fee of $35.00 for up to 6 Gallons OR Speedee Hazardous Fee of $20.00 for up to 6 Gallons.
$0.00
*
+ -

An ink haze and stencil residue remover that is effective on most inks and emulsions. The efficiency depends on the age of the dried-in ink. Haze Remover Paste No. 78 does etch mesh surfaces.

 

To avoid premature rupture of your mesh, (especially worn or fine mesh), it is best to limit the application time to as short as necessary and never more than 10 minutes. Wear goggles and gloves.

 

Follow instructions carefully to avoid damaging mesh. Recommended for use with all Ulano Stencil systems on all mesh except natural silk and metalized polyester. For industrial use only. Very low alkaline content.

 

Instructions
-Power wash after rinsing most of the haze remover from the mesh
-Remove ink and stencil as usual and allow the mesh to dry.
-Stir the Haze Remover Paste No. 78 thoroughly.
-Results can be improved if the mesh is treated with the solvent of the ink before the paste is applied.
-Water on the screen or brush dilutes the action of the chemical.
-Brush the paste briskly on both sides of the dry screen with a dry, long bristle nylon brush.
-Haze Remover Paste No. 78 does etch mesh surfaces. To avoid premature rupture of the mesh, especially worn or fine mesh, it is best to limit the application time to as short as necessary.
-Let the screen stand for no more than ten minutes or the paste can damage the mesh.
-Never let No. 78 dry on the mesh.
-Rinse with a gentle spray to avoid splashing the chemical, then a power spray from both sides.

 

Health & Safety Information

 

Haze Remover Paste No. 78 is for industrial use only. Use adequate ventilation. Avoid prolonged breathing of vapors. Avoid contact with the skin, eyes, mucous membranes, and clothing. Haze Remover Paste No. 78 is combustible: do not use near heat or open flame. It is corrosive and contains caustic soda, causing severe burns on contact. Harmful or fatal if swallowed. Flush spills immediately with water mixed with equal parts of vinegar. Wear rubber gloves, goggles (or preferably a plastic face mask), and a plastic or rubber apron.

 

First Aid: Eyes - Flush immediately with water for at least 20 minutes.

 

External - Flood exposed area with water for at least 15 minutes. Wash with a solution of equal parts vinegar and water.

 

Internal - Drink large quantities of water or milk followed by citrus juice or diluted vinegar. Do not induce vomiting. CALL A PHYSICIAN AT ONCE.

 

UPS or FedX Hazardous Fee of $35.00 for up to 6 Gallons OR Speedee Hazardous Fee of $20.00 for up to 6 Gallons.