Description
The most Environmentally safe way to save time and money on your screen reclaiming. Easiway dip tank users reduce chemical consumption by up to 70%, decreasing labor needs by up to 50%. The average savings is $0.50 per screen!
Add chemical at 1:7 ratio with water. For the PT-520 dip tank we recommend 5 gallons of Easistrip Supra One step ink cleaner & emulsion remover and up to 32 gallons of water (leaving approximately 6-10 inches from the top of the tank for the water to fluctuate when you dip your screens).
** This tank is ideal for small to medium-sized businesses/ automatic screen users. This tank will hold 3-4 roller frames.
Tank Includes:
- Dip Tank
- Lid/Cover
- Tank Brace
- Hold down rods
**This tank does not include a drain.
Dimensions & Weight:
- Volume: 37 Gallons
- Outside tank dimensions without lid33″ W x 11.5″ D x 37″ H
- Inside DImensions: 28.75″ W x 7.5 D x 35.5 H
- Inside Lip: 2″
- Weight 40 lbs
Chemical Recommendations:
1:7 Chemical to Water ratio using Easistrip Supra
- PT520 (37 Gallon Dip Tank)
- 5 Gallons of Easistrip Supra One Step Ink Cleaner & Emulsion Remover
- Up to 32 Gallons of water
Equipment Instructions:
Scrape as much ink out of your screen, dip your frame in your tank for 1-3 minutes (just enough time to soften your emulsion), bring to your washout booth and high-pressure rinse both sides of the screen. Your screen will then be ready for the stain removal process.
- Scrape as much ink off of your screen as possible
- Place screen in your dip tank and let it soak for roughly 2-3 minutes
- Pull the screen out of the dip tank and allow excess fluid to drain back into the tank
- Bring your screen to the washout booth
- High pressure rinse the excess ink and stains from your screen
- Low-pressure/ flood rinse your screen to remove any excess chemical from the mesh
- Dry your screen- it will then be ready for reuse