Frame Adhesive

For mesh counts lower than 110. 1 lb bottle. Ethyl Cyanoacrylates should be tried first for most production applications. They are the least expensive adhesives but produce the most blooming. The are designed to bond a wide range of similar and dissimilar materials: plastics, metals, elastomers, etc.,. They bond both porous and non porous surfaces. They have excellent aging and weathering characteristics. They are single component, room temperature and rapid curing adhesives. These can be rapidly cured with an Activator They are ideal for parts that are clean and ready to be bonded. Viscosities range from water Thin (5cps) to Gel (100,000+cps). These Adhesives will bond various substrates with gaps up to .015″ and fixturing cure speeds from 1 to 25 seconds.

Recommended for all frames. The 280 series is excellent for wood, metal and aluminum frames using mesh counts of 260 or higher. MUST USE FRAME FAST ACTIVATOR 304 (FFA300) SPRAY TO SET ADHESIVE

Liquid seal is a flesible and strong adhesive product with multiple applications in your screen making department. Adhere fabric to frames, seal wood frames, blockout screens and eliminate seepage. It's not affected by screen printing solvents and can be used in dip tank applications. Works on wood, aluminum, steel, plastic or any other type of frame.

For mesh counts 110 - 300. 1 lb bottle. Ethyl Cyanoacrylates should be tried first for most production applications. They are the least expensive adhesives but produce the most blooming. The are designed to bond a wide range of similar and dissimilar materials: plastics, metals, elastomers, etc.,. They bond both porous and non porous surfaces. They have excellent aging and weathering characteristics. They are single component, room temperature and rapid curing adhesives. These can be rapidly cured with an Activator They are ideal for parts that are clean and ready to be bonded. Viscosities range from water Thin (5cps) to Gel (100,000+cps). These Adhesives will bond various substrates with gaps up to .015″ and fixturing cure speeds from 1 to 25 seconds.

Recommended for all frames. The 280 series is excellent for wood, metal and aluminum frames using mesh counts of 260 or lower. MUST USE FRAME FAST ACTIVATOR 304 (FFA300) SPRAY TO SET ADHESIVE

A solvent designed to dissolve cured adhesive from hands or work areas in case of accidental bonding.

Low Viscosity Clear Adhesive designed for mesh counts of 300 or finer on wood, aluminum and steel. 16 oz Bottle

Liquid seal is a flesible and strong adhesive product with multiple applications in your screen making department. Adhere fabric to frames, seal wood frames, blockout screens and eliminate seepage. It's not affected by screen printing solvents and can be used in dip tank applications. Works on wood, aluminum, steel, plastic or any other type of frame.

All Frame Fast Adhesives set instantly with #304 Activator Spray 15 oz Can

10 oz. aerosol can