Description
Procedures for using Calcium Slayer – STEP 1
- Remove all ink from press rollers.
- Isolate ink train from plate cylinder. Don’t drop the forms.
- With the press stopped, apply a single 1/4″ wide bead of pink Calcium Slayer to the ink roller train.
- Start the press and allow to run through the ink roller train for 2-3 minutes.
- Do NOT rinse Calcium Slayer.
- Proceed directly to Flush (Step 2) application.
Procedures for using Flush – STEP 2
- With the press stopped, apply a single 1/4″ wide bead of blue Flush to the ink roller train.
- Start the press and allow to run through the ink roller train for 2-3 minutes.
- Apply liberal amounts of clean, hot water to the ink roller train until flush and contaminants are purged from the rollers. Finish with usual press wash procedure.
Heads-Up:
When used as prescribed, Calcium Slayer & Flush will remove an abundance of calcium, ink, paper lint, and other debris from the ink train rollers. Weekly use is recommended.
Initial usage may require multiple applications to remove all build-ups.